ITER: anuncios de licitación

I+D+i Noticias

Les presentamos los últimos anuncios de licitación de ITER facilitados por el CDTI:

  • REF 839: IO/22/CFT/23077/FMR‘Design and Build Contract for the adaptation and extension of Building 56’. Se puede consultar la documentación  aquí. El objetivo del contrato es:  Building 56 was erected in 2014 for the pre-assembly of the so-called cryostat, the vacuum-tight container that will surround the ITER vacuum vessel and superconducting magnets. Once this pre-assembly activity is completed, the building needs to be adapted and extended to house the ITER Maintenance Test Facility (IMTF). The goal of the IMTF is to confirm the ITER on-site remote handling maintenance capabilities by testing maintenance equipment and training maintenance personnel. The envisaged extension has a total floor surface of approximately 2250 m2 and is composed of a workshop of 1800 m2 and a technical annex building of 450 m2. The workshop will include a concrete pit of 3.6 m deep and be equipped with an overhead crane with a lifting capacity of 30 T. El rango de la licitación se encuentra entre 4 000 000 –12 000 000 EUR. Para participar, se requiere entre otros aspectos, tener experiencia reconocida en el citado campo. Los candidatos interesados en participar en esta Call for Nomination deben expresar su interés, indicando el número de referencia de la CFN y la correspondiente información de contacto (nombre de la compañía, dirección, persona de contacto, teléfono, número de fax, e-mail y web) por email, cumplimentando el siguiente archivo Excel antes del 27 de marzo de 2022 a (ITER-Calls@f4e.europa.eu).
  • IO/22/OT/23173/JPA Prior Indicative Notice (PIN): “Procurement of IO PIC Local Air Coolers for B11-L5 SIC rooms” Ver documentación adjunta  aquí El objetivo del contrato es:  The purpose of this contract is to design, manufacture, test, qualify and deliver 10 (ten) water cooled Local Air Coolers (LAC) aimed to ensure the safety cooling function of the 4 cubicles rooms located in the 11-L5-01 area of the Tokamak Complex. Each LAC is designed for a 25kW thermal cooling power. Because of their location and their safety classification, those LAC will be designed to withstand (among other requirements) static magnetic field and seismic event. In addition to these LAC, 2 (two) exhaust fans (designed for less than 1000m3/h flowrate) have to be supplied to provide fresh air in the cubicles rooms. These exhaust fans do not ensure a safety function and don’t need to be designed for accidental situations but for the static magnetic field. Los candidatos interesados en participar deben cumplimentar el archivo adjunto y remitirlo antes del 2 de marzo debidamente cumplimentado, sellado y firmado a:  jessica.pilla@iter.org con copia a  andrew.brown@iter.org
  •  

    REF 842: IO/22/OT/70000788/KJT Prior Indicative Notice (PIN): “Services for Commissioning support”.Ver documentación adjunta  aquí. El objetivo del contrato es:  The scope of work is a full-time service covering the commissioning of ITER process systems includingElectro-Mechanical & Field I&C Commissioning execution, writing and preparation of Commissioning, Operations and Maintenance documentation and preparation of Commissioning related tasks.The requested service for Commissioning field tasks covers all activities required to demonstrate the functions of the Systems as defined in the related Systems Commissioning Plans and Systems Design Description Document, it is including but not limited to the following type of works: Valves Test, MCC/DB,Cubicles Test, Sensors Test, Flushing Tests, I&C Cubicles Test, Input-Output test, Motor test, Pump test, Flow balancing, etc.The Contractor shall provide services based on electro-mechanical & field I&C Commissioning, Testing and Writing of Commissioning, Operations or Maintenance documentation of ITER Systems. Los candidatos interesados en participar deben cumplimentar el archivo adjunto (Annex I) y remitirlo a Kristel.Jeanmart@iter.org con copia a Yo.Maeda@iter.org antes del 28 de marzo.

     

Noticias relacionadas

Convocatoria Abierta: Activa Industria 4.0

I+D+i / Noticias

El Programa Activa Industria 4.0 te ofrece un diagnóstico y análisis exhaustivo de la situación digital de partida...

Boletín de Vigilancia Tecnológica

I+D+i

Se ha publicado un nuevo número del Boletín de Vigilancia Tecnológica: "Sector Metal-Mecánico"

Convocatoria de los proyectos de colaboración público-privada

Noticias / I+D+i

Se ha publicado la convocatoria de proyectos en colaboración público-privada de la Agencia Estatal de Investiga